Get a Mouse Key + Page Up/Down + Laser Pointer In One Device: Wide Pointer

Use Wide Pointer to Deliver Presentation With Ease and Finess WIDE POINTER is a unique device that combines the features of the presentation controller, wireless mouse and laser pointer in one ergonomic device. With WIDE POINTER, you don't need to stand beside your notebook PC or have an additional person to assist you, nor do you need to aim at the receiver of the remote control. Excellent 2.4 GHz RF technologies enable the user to control the presentation wirelessly up to 100 feet (30 meters) away indoors. It is a USB plug-and-play device with no additional software required. The automatic laser beam safety switch provides protection against unintentional laser beam into human eyes. Take a look below at the rich features in this must-have tool for presenting with power and ease. Keys Function description Laser Press Fn + On/Off together to activate the laser function first, and then press Laser key to shoot the laser beam. Up Push up the switch and go back to the previous slide. F5/ESC Click to start the slide show. (similar to pressing F5 in PowerPoint) Press and hold more than three seconds to exit the slide show. (similar to pressing Esc in PowerPoint) Down Pull down the switch and go to the next slide. Fn + On/Off Press and hold both Fn and On/Off for two seconds to activate the laser. (the mode indicator flashes) Press and hold again for two seconds to deactivate the laser. (the mode indicator flashes) Fn + Alt+Tab Switch from one program/file to another in presentation (similar to pressing Alt-Tab in PowerPoint) Fn + Link Re-associates ID link with receiver. Fn + Left Mouse Turn the screen black Fn + Right Mouse Turn the screen white Note> 1.  Idling over 30 minutes, the laser key will be de-activated automatically. 2.  Press and hold both Fn and On/Off key on the right side for two seconds to activate the laser.(the mode indicator flashes) 3.  If you have several RF devices within range and working at the same channel, the presenter is jammed evidently, you need to change RF ID for better communication quality. Please do as follows: 4.  Press the ID link button on the receiver and the LED lights up steady. This means the receiver is ready for linking. 5.  Press the Fn and Link keys on the Presenter simultaneously for more than three seconds. The LED on the receiver begins blinking to confirm a successful link.     Frequency range 2400~2483MHz Remote range 100 feet (30 meters) indoors 328 feet (100 meters) outdoors Operating voltage Remote control: 2.4V~3.3V, Laser: 2.6V~3.3V Power AAA batteries * 2 Very low power consumption Normal operation <10mA Laser operation < 20mA Sleep < 10uA Output power Under 1mW Size Transmitter : 130(l) x 38.2(w) x 21.2(h) mm Receiver : 68.15(l) x 18(w) x 10.3(h) mm  Weight Approx.  Tx 60 grams (include batteries)   Rx 8 grams Temperature Operating: 0℃(32℉)~60℃(140℉) Non-operation: -10℃(14℉)~65℃(149℉)   Humidity(non-condensing) Operating: 10%~85% RH Non-operating: 10%~95% RH Laser Semiconductor laser(λ= 650 nm) emission duration: continuous Laser output power Max.0.95 mW System Requirement Windows 98 SE, Me, 2000, XP Mac OS 9.1, Mac OS X (10.1) or later One available USB port for connecting the USB receiver dongle.    Here Is what You Will Get in the Wide Pointer Pack:     Transmitter, Receiver, Battery, Case, Pouch, User Manual    Now available at $30 off - Regulary $149 - Order Now for only $119